When reader is connected only with RS485 how to change reader stand by color to red/orange. Customer wants reader to stay red/orange and when card has access it beeps and turns to green, it’s easier to understand this way.
Answer:
Here is the way to make standby LED from blue to red. So the R1352 will have standby LED in Red and turn into green when someone swipes the card.
1. Connect R1352 to GV-HUB/GV-COM and start the GV-R/RK/DFR Config AP(Please refer to the attachment). Then, follow the configuration in the screenshot below.
- 03205002.png (64.86 KiB) Viewed 3144 times
3. Well done.
However, if you need the LED to standby in red and turn green when "granted access". Please follow the steps in the user manual.
- Check the Green LED in GV-R/RK/DFR Config AP.
- Connect the Green LED wire (orange) to output on AS810
- Setup the output settings in AS810's webpage
Reference:
[ EVS - 201803205002 ] R1352, AS810, LED settings
