[ SNVR ] VS2400, SNVR0411, motion detection with 4ch live view - 20170930
Posted: September 30th, 2017, 7:06 pm
Question:
Since newest firmware of vs2400 is onvif supported now, can SNVR support VS2400's motion detection?
Answer:
Yes, you can add GV-VS2400 into SNVR via ONVIF but you will only get the first channel for the live view and motion detection.
ONVIF: 1 ch for live view with motion detection support
RTSP: 4 ch for live view without motion detection support
Please refer to the chart below for current rules.
*Note. Only Motion Event of the 1st channel will be sent to Milestone, when connected with VS2400 via ONVIF during the test
Reference:
[ UVS - 201709255002 ] VS2400, SNVR0411, motion detection with 4ch live view
Since newest firmware of vs2400 is onvif supported now, can SNVR support VS2400's motion detection?
Answer:
Yes, you can add GV-VS2400 into SNVR via ONVIF but you will only get the first channel for the live view and motion detection.
ONVIF: 1 ch for live view with motion detection support
RTSP: 4 ch for live view without motion detection support
Please refer to the chart below for current rules.
- 09255002.PNG (7.1 KiB) Viewed 2286 times
Reference:
[ UVS - 201709255002 ] VS2400, SNVR0411, motion detection with 4ch live view