[ DVR/NVR ] Procedure on how to change interface language on GV-NVR - 20170628
Posted: June 28th, 2017, 3:26 pm
Below is a detailed procedure on how the GV-NVR can be changed. The following example is a language conversion from English to Traditional Chinese in an English-based operating system.
1. First go to [Control Panel] > [Region and Language] > [Administrative] > select [Change system local…] to the language you would like to use, as illustrated below(change a language from English to Traditional Chinese in this case):
2. Restart the PC to apply this settings as windows requested, you will see the
language of GV-system shows the language
Please note this will take effect for all of your software which also including the GV-software such as Remote ViewLog, as shown below:
This complete the language changing process of all GeoVision software.
Reference:
[ 201704122001] Customer wants to change GV-NVR in a German Windows Operating System to Traditional Chinese.
1. First go to [Control Panel] > [Region and Language] > [Administrative] > select [Change system local…] to the language you would like to use, as illustrated below(change a language from English to Traditional Chinese in this case):
- Pic1.png (17.41 KiB) Viewed 11558 times
language of GV-system shows the language
Please note this will take effect for all of your software which also including the GV-software such as Remote ViewLog, as shown below:
- Pic2.png (136.09 KiB) Viewed 11558 times
Reference:
[ 201704122001] Customer wants to change GV-NVR in a German Windows Operating System to Traditional Chinese.