GV FAE Knowledge

Here is the list of filenames and folder names that would be checked when DVR software is scanned by antivirus software:

1. This is the main folder of DVR folders that would be checked.
D:\Record (Folder and have subfolders)
I:\Record (Folder and have subfolders)
C:\GV-650B (Folder and have subfolders)

2.Below are the of DVR’s setting files in Windows folder that will be checked.
C:\Windows\GeoOCX (Folder and have subfolders)
C:\Windows\GVLOGIP (Folder and have subfolders)
C:\Windows\IPCAMX (Folder and have subfolders)
C:\Windows\MiniPCSetting (folder and have folders)
C:\ProgramData\GeoOCX (folder and have folders)
C:\ProgramData\Geovision (folder and have folders)

3.Below are the locations of older versions DVR will be checked.
C:\Windows\SysWOW64\v8300 (Folder and have subfolders)
C:\Windows\SysWOW64\v8500 (Folder and have subfolders)
C:\Windows\SysWOW64\v8570 (Folder and have subfolders)
C:\Windows\SysWOW64\v8580 (Folder and have subfolders)
C:\Windows\SysWOW64\v8590 (Folder and have subfolders)
C:\Windows\SysWOW64\v8600 (Folder and have subfolders)
C:\Windows\SysWOW64\v8610 (Folder and have subfolders)
C:\Windows\SysWOW64\v8631 (folder and have folders)

4. Below are the User initiation files that will be checked.
C:\Windows\GEO_CS.ini
C:\Windows\Geo6cam.ini
C:\Windows\geoat.ini
C:\Windows\GeoBackupSvr.ini
C:\Windows\GeoBrand.ini
C:\Windows\GeoCamIPMapping.ini
C:\Windows\GeoCodec.dll
C:\Windows\GeoDataFIFO.ini
C:\Windows\GeoDebug61.ini
C:\Windows\GeoDebugMP4U.ini
C:\Windows\GeoDebugVS.ini
C:\Windows\geoDVRPip.ini
C:\Windows\GeoDxDraw.ini
C:\Windows\GeoHealth.ini
C:\Windows\geohealth-02.ini
C:\Windows\geohealth-10.ini
C:\Windows\geohealth-11.ini
C:\Windows\GeoImageEnhance.dll
C:\Windows\GeoImageEnhance.ini
C:\Windows\GeoImageProcess_8200.ini
C:\Windows\GeoIPCamXGeneral.ini
C:\Windows\GeoIPCamXList.ini
C:\Windows\geolan.ini
C:\Windows\geomdbrepair.ini
C:\Windows\GeoMiniPCSetting.ini
C:\Windows\GeoMpeg4.ini
C:\Windows\geoMtPlx.ini
C:\Windows\GeoMulti.ini
C:\Windows\GeoPAL.ini
C:\Windows\GeoProductSetting.ini
C:\Windows\GeoPTZ.ini
C:\Windows\GeoRepair.ini
C:\Windows\GeoRIOM.ini
C:\Windows\GeoRuntime.ini
C:\Windows\GeoSysCenter.ini
C:\Windows\GeoVideoServer.ini
C:\Windows\GeoWT.ini

5.Below is the System setting files and log files that will be checked.
C:\Windows\GV_AccessIni_Memory.dll
C:\Windows\GV_GeoPTZini.dll
C:\Windows\GvCMSvr.ini
C:\Windows\GVComPort.ini
C:\Windows\GvIPCamDeadLockFlagLog.ini
C:\Windows\GvIPuPNPLog.ini
C:\Windows\GvMegaPixelViewer.ini
C:\Windows\GVProductVSCmdMapping.ini
C:\Windows\GvPTZ_General.ini
C:\Windows\GvPTZ_IO.ini
C:\Windows\GvSaveImage.ini
C:\Windows\GVViewlogDB.bd
C:\Windows\GVViewlogDB.bd
C:\Windows\GVViewlogDB.fd
C:\Windows\GVViewlogDB.fd
C:\Windows\GVViewlogDB.hd
C:\Windows\GVViewlogDB.rd
C:\Windows\GVViewlogDB.sd
C:\Windows\GVUSBD.DLL
C:\Windows\HWCodecLoader.dll
C:\Windows\HWCodecLoader_HEVC.dll
C:\Windows\IntelHWCodec.dll
C:\Windows\IntelHWCodecHEVC.dll
C:\Windows\Mpg4c32.dll
C:\Windows\PTZBackupFile.ini
C:\Windows\PTZConfigTable.xml
C:\Windows\PTZRUI.dll

6. BELOW are the Codec and Drivers files that will be checked.
C:\Windows\System32\drivers\GVT68Series.sys
C:\Windows\SysWOW64\drivers\GVT68Series.sys
C:\Windows\SysWOW64\GeoADPCM.acm
C:\Windows\SysWOW64\GeoAudio.acm
C:\Windows\SysWOW64\GeoCodec.dll
C:\Windows\SysWOW64\GeoCodecD.dll
C:\Windows\SysWOW64\GeoStartupAgentService.exe
C:\Windows\SysWOW64\GX264.dll
C:\Windows\SysWOW64\GX264D.dll
C:\Windows\SysWOW64\GXAMP4.dll
C:\Windows\SysWOW64\GXAMP4D.dll
C:\Windows\SysWOW64\GXAVC.dll
C:\Windows\SysWOW64\GXAVCD.dll
C:\Windows\SysWOW64\GXGM20.dll
C:\Windows\SysWOW64\GXHEVC.dll
C:\Windows\SysWOW64\GXHEVCD.dll
C:\Windows\SysWOW64\GXJPG.dll
C:\Windows\SysWOW64\ir32_32.dll
C:\Windows\SysWOW64\ir41_32.ax
C:\Windows\SysWOW64\ir41_qc.dll
C:\Windows\SysWOW64\ir41_qcx.dll
C:\Windows\SysWOW64\ir50_32.dll
C:\Windows\SysWOW64\ir50_qc.dll
C:\Windows\SysWOW64\ir50_qcx.dll
C:\Windows\SysWOW64\irclass.dll
C:\Windows\SysWOW64\irprops.cpl