[ Dispatch ] Unable to connect to CenterV2 - 20170224

[AndyChen]

Issue:
Dispatch Server is not connected to Center V2

Patch / Procedure:
1. In Dispatch, type in correct port number and identification code on the left hand side.
Match dispatch's Identification code and port with CenterV2's preference window on the right hand side.

f.png (277.28 KiB) Viewed 4438 times

Dispatch's host name also need to matched with CenterV2's Location Name.

123.png (261.65 KiB) Viewed 4436 times

2. In CenterV2, Go to Dispatch Server tag >> Type in dispatch's identification, IP address and port.
Then Go to Network tag >> Define your CenterV2's location name and its IP address

22222.png (294.21 KiB) Viewed 4434 times

3. Lastly, in VMS or NVR/DVR, go to Network tag >> Enable CenterV2 information and type-in Dispatch IP address, dispatch ID/PASSWORD and port.

b.png (10.53 KiB) Viewed 4438 times

Reference:
RE: [ EVS - 201702026011 ] Under Wan, CV2 is unable to be connected to Dispatch Server