[IPCam] FD120 upgrade to firmware v3.0 fail - 20150707

Pearl · Unread post by **Pearl** » July 7th, 2015, 11:31 am

To upgrade firmware v3.0, your IP CAM NAND Flash have to be 128MB. But not all 128MB can upgrade to v3.0, there are some exception list.
Please check GV IP device utility to confirm your NAND flash size.

The following model are mix 32MB and 128 MB NAND flash:

CB120
CB220 (CBX20 series mix type only for 12v power, new model with 5v power are all 128NAND flash ram)
VDX20D
MFDX20D
BLX20D
BX140DW
BXX20D
PTXXD
PTZ010D
FDX20D

X mean different resolution, for example:
PTXXD means PT130D/220D/320D

: 128M.jpg (191.2 KiB) Viewed 2299 times

Firmware V3.0 does not apply to the following GV-IP Camera models:

· GV-BX120D / 130D / 140DW / 220D / 320D / 520D
· GV-CB120 / 220
· GV-CBW120 / 220
· Models installed with a 32 MB NAND flash
· Blank information in Note column, it didn't tell you it's 32MB or 128MB

[ UVS - 201505282004 ] can't upgrade FD120 firmware to v3.0can't upgrade FD120 firmware to v3.0

Memory_size_in_IPCAM.pdf: (101.45 KiB) Downloaded 427 times