[Cloud VMS] After GV-GEBF4911 is connected to GV-Cloud VMS, how do I set up the transmission of PVD Motion to - 20230915

hugh · Unread post by **hugh** » September 15th, 2023, 11:21 am

Question:
After GV-GEBF4911 is connected to GV-Cloud VMS, how do I set up the transmission of PVD Motion to GV-Cloud VMS?

Answer:
1. When GV-GEBF4911 is connected to GV-Cloud, the intrusion function will be forcibly turned on on the local computer, and the full-screen box will be selected to be used as PVD motion. The video setting page will be grayed out and will not allow the user to set it, and the following prompt message will pop up.

: image005.jpg (6.95 KiB) Viewed 5252 times

2. Following on from the above, for turning on the intrusion function, as long as the following actions are performed, they will be executed directly.

Enable GV-Cloud on the local side of GV-GEBF4911. Even if it is not actually connected to GV-Cloud, the intrusion function will be directly enabled.

GV-GEBF4911 manually replaces other AI functions. As long as there is a disconnection or reboot after reconnecting to GV-Cloud, it will also be forced to switch back to the intrusion function.