[ Storage System ] How to specify an Ethernet card to connect to GV-Storage System? - 20211220

[support]

Issue:
My system has multiple Ethernet cards, is it possible to specify only one to connect to GV-Storage System?

Solution:
1. Lauch Windows iSCSI Initiator

oneEthernetCardToStorage-1-20211220.jpg (3.79 KiB) Viewed 4681 times

2. Under Discovery tab, Click on Discover Portal.

oneEthernetCardToStorage-2-20211220.jpg (51.43 KiB) Viewed 4681 times

3. Enter LAN IP address of Storage system and click on Advance.

oneEthernetCardToStorage-3-20211220.jpg (43.21 KiB) Viewed 4681 times

4. Enter the specific Ethernet card LAN IP (same IP range recommended as shown in the screenshot) and select OK.

oneEthernetCardToStorage-4-20211220.jpg (99.54 KiB) Viewed 4681 times

5. Switch back to Targets tab, select and connect the desire target.

oneEthernetCardToStorage-5-20211220.jpg (77.16 KiB) Viewed 4681 times